Machine description
Machine control
– Operating elements
099-007021-EW501
29.07.2015
21
Item Symbol
Description
0
5
Operating mode / Power-saving mode button
spotArc / Spotmatic (spot time setting range)
Non-latched
Latched
Press for 3 s to put machine into power-saving mode. To reactivate, activate one of the
operating elements- See 5.19.2 Power-saving mode (Standby) chapter.
6
Pulsing push-button
TIG automated pulsing (frequency and balance)
Signal light lights up in green: Pulsing (thermal pulsing)/MMA pulse welding
Signal light lights up in red: kHz pulsing (metallurgical pulsing)
7
Gas test/rinse hose package button
- See 5.10.2.2 Setting the shielding gas quantity chapter
8
Error/status indicators
Collective interference signal light
Water deficiency signal light (welding torch cooling)
Excess temperature signal light
safety sign signal light
9
Display switching button
Material thickness display
VOLT
Welding voltage display
JOB
JOB number display
PROG
Program number display
10
Welding parameter setting rotary dial
Setting currents, times and parameters.
11
Welding data display (3-digit)
Displays the welding parameters and the corresponding values
12
HOLD
Status display
After each completed welding task, the last values used in the welding process for the
welding current and welding voltage are shown on the displays, and the signal light will
be on
13
Function sequence (see next chapter)
