Design and function
Machine configuration menu
50
099-002060-EW501
19.10.2015
5.14 Machine configuration menu
ENTER (Enter the menu)
• Switch off machine at the main switch.
• Hold down the "Welding process" button and simultaneously switch the machine on again.
Wait until the "Elt" menu item is shown and release the button.
NAVIGATION (navigating in the menu)
• Parameters are selected by pressing the "welding parameters" button.
• Set or change the parameters by turning the "welding parameter setting" rotary dial.
EXIT (Exit the menu)
• Select the "EIt" menu item.
• Press the "Welding parameters" button (settings will be applied, machine changes to the
ready-to-operate status).
ENTER
EXIT
l
0
+
NAVIGATION
Figure 5-26