Machine description
– quick overview
Machine control
– Operating elements
16
099-005207-EW501
18.05.2017
Item Symbol
Description
0
10
Push-button, wire inching
Potential- and gas-free inching of the wire electrode through the hose package to the
welding torch
> see 5.1.8.4 chapter
.
11
Upper, display
Displays welding voltage or person who designated the runtime parameters
12
Signal light, HOLD
Lit:
Display shows the last parameters used for welding.
Not lit: Display shows the setpoint values or current values during welding.
13
Signal light, Wire speed
Lights when the wire speed is shown on the display.
4.4.2
M2.40 welding machine control
Figure 4-5
Item Symbol
Description
0
1
Step switch, welding voltage
2
Signal light, Functional error
On when excess temperature detected
3
Main switch, machine on/off
4
Button, Welding task / operating point
--------- Wire speed display (m/min)
------- Welding current display (A)
-------- Sheet metal thickness display (mm)
------- Display and select the jobs (welding tasks, selection via job list).Change the
JOBs by holding down the button (approx. 3 sec), LED flashes.
