Intended use
Use and operation solely with the following machines
8
099-005262-EW501
22.11.2016
3
Intended use
WARNING
Hazards due to improper usage!
The machine has been constructed to the state of the art and any regulations and
standards applicable for use in industry and trade. It may only be used for the welding
procedures indicated at the rating plate. Hazards may arise for persons, animals and
material objects if the equipment is not used correctly. No liability is accepted for any
damages arising from improper usage!
• The equipment must only be used in line with its designated purpose and by trained or
expert personnel!
• Do not improperly modify or convert the equipment!
Wire feeder (intermediate drive) for welding wire electrodes used for gas-shielded metal-arc welding and
hose packages of up to 25 m.
3.1
Use and operation solely with the following machines
A compact or decompact system component with wire feeder is required to operate the
intermediate drive.
In addition, the system component has to be equipped with a current M 3.7X-X variant machine
control (three digital displays).
The following machine series can be combined with the intermediate drive:
• Taurus Synergic S
• Phoenix
• alpha Q
All compact 355 TKM and 355 TKWmachines in the relevant series are excluded.