Maintenance, care and disposal
Maintenance schedule
34
099-005630-EW501
02.03.2021
6.3 Maintenance schedule
Insp
ec
to
r
Type of
insp
ec-
tion
Maintenance step
Only personnel designated as inspectors or repairers due to their trai-
ning are allowed to carry out the relevant work step! Inapplicable
checkpoints are omitted.
Repair
er
• Check and clean the welding torch. Deposits in the welding torch may
cause short circuits, impair the welding result and lead to welding torch
damage!
• Connections of the welding current leads (check for tight and locked
seating).
• Is shielding gas cylinder with gas cylinder securing elements
(chain/belt) secured?
• Strain relief: Are hose packages secured with strain relief?
• Checking all supply lines and their connections (pipes, hoses, hose
packages) for damage or leaks.
• Checking the welding system for damage to the housing.
• Transport elements (strap, lifting eyes, handle, wheels, parking brake)
corresponding safety elements (if necessary fuse caps) are present
and flawless?
• Cleaning connections of coolant pipes (quick connect coupling,
connections) from impurities and install protective caps when not in
use.
• Gas test that the solenoid valve opens and closes properly.
• Checking operating, signalling and indicator lights, protective devices
and actuators.
• Cleaning dirt filter (if applicable)
> see 6.3.2 chapter
• Clean external surfaces with a damp cloth (do not use aggressive
cleaning agents).
• Cleaning the power source (inverter)
> see 6.3.3 chapter
• Cleaning heat exchanger (torch cooling)
> see 6.3.4 chapter
• Check for sufficient frost protection
• Coolant change (torch cooling)
> see 6.3.1 chapter
• Periodic inspection and testing
> see 6.3.5 chapter
