Page 10
Battery - Use and charge
1. Plug the cord into the charger.
2. Plug the other end of the cord into an appropriate outlet.
3. Insert the
red
charger connector into the
red
battery connector.
4. Insert the
black
charger connector into the
black
battery connector.
5. The red indicator light turns on to indicate that the battery is charging.
6. The charge is complete once the light has turned green. The battery is then fully
charged and can be used.
To remove the battery pack
1. Push on the side button (4) and firmly pull the battery pack out
of the handle track.
2. If the battery needs recharging, charge the battery pack following
the instructions in the charging section of the manual.
Charging the battery
To ensure optimum performance
and a longer life for the Li-Ion
battery, charge your battery pack
fully before use.
Even though the charger and battery
are protected, it's best not to reverse
the polarities when plugging the
battery into the charger. This will
reduce the risk of electric shock, fire,
or electrocution.
N
O
TE
Smartphone application
Ewincher can connect to a smarphone via Bluetooth, using the
Ewincher app available at the Play Store and Apple Store. You can
adapt your handle by adjusting the maximum effort you wish to
exert (between 10kg and 36kg of effort on the handle). You can
also consult a range of usage information, such as duration of use,
maximum effort applied, etc..
Torque limiter
36kg
To connect your Ewincher to your Apps :
1.
Switch on your Ewincher (permanent green light)
2.
Start the Apps on your smart phone (bluetooth activated)
3.
Your Ewincher is going to connect
