14
1
2
3
4
5
6
1
2
3
4
5
6
CLEANING AND MAINTENANCE
How to Replace Brush Roll Bar or Belt
Caution:
Make sure vacuum is turned off and power cord is unplugged.
• Put the product on a flat surface, with wheel facing upwards
• Use a Philips screwdriver to remove 6 screws at the bottom of the base (Fig. 1) lift out brush
cover
• Rotate right end of brush roll bar and lift it out, then lift out left end of brush roll bar. (Fig. 2)
• To replace belt ,position new belt around motor shaft (Fig. 3), loop new belt around brush
roll bar shaft at left end of brush roll bar, then insert left end of brush roll bar first, align brush
roll bar end cap with slot to make it fits into position, press right end of brush roll bar into
position (Fig.4)
• Refit brush roll bar cover and twist 6 screws into base (Fig 5)
1.
3.
1
2
3
4
5
6
1
2
3
4
5
6
2.
4.
5.
