15
Ewbank, 38 Bluestem Road, Ipswich, Suffolk, IP3 9RR Tel. 01473 271 272
CLEANING AND MAINTENANCE
CLEANING THE BODY
Switch off the vacuum cleaner and remove the battery
Important!
No parts can be washed in a dishwasher.
The body, the dust container and the filter chambers can be wiped with a
damp cloth if required. Avoid any liquid from entering any of the vacuum
cleaners openings. Do not use strong cleaning substances and do not use
coarse objects like a scouring pad as this will damage the plastic surface. Only plug
in the appliance once all elements are completely dry. Hair and fluff may gather on the
wheels and on the base of the floor head. Ensure to remove this so to avoid the either
becoming jammed.
Caution!
Do not allow any liquid to touch the battery unit or enter the battery chamber.
Doing this could cause injury and will most likely damage the battery.
Important!
Oiling or lubricating any part of the vacuum cleaner is not recommended as
this will cause dirt and fluff to become stuck.
To remove the brush bar slide the latch on the base
of the motorised floor head to the left. Remove the
brush bar by lifting it out from the cavity.
To access the brush bar of the turbo brush, use
a coin to turn the lock on the right hand side of
the attachment. Then follow the same instructions
outlined above.
CLEANING THE MOTORISED FLOOR HEAD/TURBO BRUSH
Caution!
Do not wash the brush bar with water. This could damage the brush bar and
liquid could enter the vacuum cleaner causing it to break or injure the user.
Important!
After using the vacuum cleaner for an extensive amount of time hair may stick
or become entangled in the brush bar. Please ensure this is removed for the
vacuum cleaner to continue working efficiently.
