EVS Broadcast Equipment SA
11
5 Settings Menu
Introduction
The settings menu displays the current state of each setting within the
DIO88 and enables the item to be changed or adjusted.
Settings can be changed using the front panel of the Synapse frame
(SFR18, SFR08 or SFR04) or EVS Cortex.
Please refer to chapter 3 for information on the Synapse front panel
control and EVS Cortex.
SYSTEM CONTROL
SRC
The AES/EBU inputs are connected to a Sample Rate Converter. This
enables the input to use audio sample rates that are non-synchronous to
video of the master card (setting
On
). For Non PCM audio data (Dolby
Digital, Dolby E, etc.) the SRC can be bypassed and the data is inserted
in the card transparently (
Trans
).
The default setting is
On
.
In_Out
In_Out
determines how the synapse bus inputs and outputs work.
There’s 3 modes:
■
4In-4Out
: 4 AES/EBU input and 4 AES/EBU outputs
■
8In
: 8 AES/EBU input and no outputs
■
8Out
: no inputs and 8 AES/EBU outputs
Refer to the block schematics for more details on the difference modes.
INPUT CONTROL
Sel_Ch1 ~ Sel_Ch16
With these settings you select which audio source you want to use for
process channel 1 till channel 16. You can choose either
Local
audio
(using the card’s own AES/EBU inputs) or audio coming from the
Master
card via de ADD-ON bus.
Note:
when the card is set to
8Out
mode (in the
In_Out
setting) the
local inputs aren’t used and therefore can’t be selected here.
Ch_1 ~ Ch_16
With these settings you select the actual source channel in the above
selected source.
Note:
When Local is selected, you can choose channel 1 till channel
16
.
When Master is selected, you can choose channel 1 till channel
32
.
