EVS Broadcast Equipment SA
5
3 A Quick Start
When Powering-
up
On powering up the Synapse frame, the card set will use basic data and
default initialization settings. All LEDs will light during this process.
After initialization, several LEDs will remain lit – the exact number and
configuration is dependant upon the number of inputs connected and the
status of the inputs.
Default settings
In the default condition, the DIO88 acts as a Dolby Digital Plus encoder
locked to AES input 1, encoding AES 1/2 till AES 7/8 into a 5.1+2
Dolby digital plus output, using external incoming meta data program
streams.
Changing
settings and
parameters
The front panel controls or EVS Cortex can be used to change settings.
An overview of the settings can be found in chapter 5, 6 and 7 of this
manual.
Front Panel
Control
Front Panel Display and Cursor
Settings are displayed and changed as follows;
Use the cursor ‘arrows’ on the front panel to select the menu and
parameter to be displayed and/or changed.
Press
►
To
go forward through the menu structure.
Press
◄
To
go back through the menu structure.
Press
▲
To move up within a menu or increase the value of
a parameter.
Press
▼
To move down through a menu or decrease the
value of a parameter.
REMARK:
Whilst editing a setting, pressing
►
twice will reset the
value to its default.
[No Alarms]
