EVS SYNAPSE CDV29, Installation And Configuration Manual

Page: 7 / 20

EVS Broadcast Equipment SA
5
2 Unpacking and Placement
Unpacking
The EVS Synapse card must be unpacked in an anti-static
environment. Care must be taken to NOT to touch component on
the card – always handle the card carefully by the edges. The card
must be stored and shipped in anti-static packaging. Ensuring that
these precautions are followed will prevent premature failure from
components mounted on the board.
Locating the card
The Synapse card can be placed vertically in an SFR18 frame or
horizontally in an SFR04 frame. Locate the two guide slots to be
used, slide in the mounted circuit board, and push it firmly to
locate the connectors.
Correct insertion of card is essential as a card that is not located
properly may show valid indicators, but does not function
correctly.
REMARK: On power up all LEDs will light for a few seconds,
this is the time it takes to initialise the card.