EVS SYNAPSE CDV29 Installation And Configuration Manual Download Page 2

INSTALLATION AND CONFIGURATION MANUAL 

CDV29 

 

Copyright 

EVS Broadcast Equipment S.A. – Copyright © 2001 – 2021. All rights reserved. 

Disclaimer 

The information in this manual is furnished for informational use only and subject to change 
without notice. While every effort has been made to ensure that the information contained in this 
user manual is accurate, up-to-date and reliable, EVS Broadcast Equipment cannot be held 
responsible for inaccuracies or errors that may appear in this publication. 

Improvement Requests 

Your comments will help us improve the quality of the user documentation. Do not hesitate to 
send improvement requests, or report any error or inaccuracy on this user manual by e-mail to 

[email protected]

Regional Contacts 

The address and phone number of the EVS headquarters are usually mentioned in the 

Help

 

>

 

About

 menu in the user interface.  

You will find the full list of addresses and phone numbers of local offices either at the end of this 
user manual (for manuals on hardware products) or on the EVS website on the following page: 

http://www.evs.com/contacts

User Manuals on EVS Website 

The latest version of Media Infrastructure manuals are available at: 

https://mi-sftp.evs.com/

 

The user manuals for other EVS products can be found at the EVS download center, on the 
following webpage: 

https://www.evs.com/en/download-area

 

 
 
 

Summary of Contents for SYNAPSE CDV29





















Reviews: