EVS LSM-VIA User Manual Download Page 57

Page: 57 / 276

•

Conditional

: the playlist is loaded on a single PGM when the selected Channel Control mode is Multi

PGM controlling a single PGM. Otherwise, it is loaded in PGM+PRV.

See section "Loading a Playlist" on page 218.

PGM+PRV / Multi-PGM

The parameter is used to select the Channel Control mode.

It reflects the currently selected Channel Control mode.

See section "Selecting the Channel Control Mode" on page 19.

Mark Live / Playback

The parameter is used to determine how the mark points will be set.

•

Live: mark points are set on all the record trains, at the LIVE input timecode of the train loaded on the
smallest controlled PGM.

•

Playback: mark points are set at the current timecode of the clip or the train loaded on the smallest
controlled PGM.

See sections "Managing Mark Points on Trains" on page 57 and "Managing Mark Points on Clips" on
page 105.

Specific Functions Buttons (4)

This area provides buttons giving quick access to specific functions.

From the current version, only the following buttons are available:

Shotbox

The

Shotbox

function allows users to have a quick access to frequently-used media (local or remote

clips or playlists).

See section "Using the Shotbox for Quick Actions" on page 245.

Recall

The

Recall

function allows you to quickly find back a local or remote clip or playlist by typing directly its

LSM ID, without having to go back to its page and bank. See section "Recalling Clips or Playlists by LSM
ID from the Remote Panel" on page 232.

It also allows you to connect to a remote server and to navigate through its pages and banks. See
section "The Recall Screen" on page 227.

Trains

The

Trains

function gives access to the whole list of record trains from the online servers of the XNet,

would the server be local or remote.

See section "The Trains Screen" on page 236.

Export Playlist

This button is used to export a playlist to VIA Xsquare targets.

See section "Exporting Playlists" on page 166.

USER MANUAL

LSM-VIA | 5. Working with Record Trains |

Summary of Contents for LSM-VIA





















































































































































































































































































Search results

Summary of Contents for LSM-VIA

Reviews:

Related manuals for LSM-VIA

Brands by name

Popular brands

EVS LSM-VIA, User Manual

Search results

Summary of Contents for LSM-VIA

Reviews:

Related manuals for LSM-VIA

Brands by name

Popular brands