LSM 3 CAM
User's Guide
LSM3CAM_1.09_990629.doc
Page: 21/25
Author : Marianne LOTHAIRE rev B.STAS
Software : LSM4CAM.EXE v.1.09 29/06/99
EVS Broadcast Equipment Email : [email protected] Tel: +32-4-361 7000 FAX: +32-4-361 7099
How to update a playlist ?
SEARCH WITHIN THE PLAYLIST
1.
Press the PLST key on the remote to enter the Playlist mode.
2.
Use the command knob to search within the play list. Clips are chained
automatically. You can modify SHORT IN and SHORT OUT points of
clips directly inside the playlist by pressing the IN and OUT key on the
remote.
BROWSE WITHIN THE PLAYLIST
1.
Select the browse mode (press BROWSE on the remote panel). The
corresponding button lights red.
2.
Use the command knob to browse within the play list. The current clip is
updated (highlighted on the LCD display of the remote) and its first field
is displayed on the output monitor. On this monitor, the number of clips
in the play list (nb) and the current clip (clp) are displayed in the lower
part of the screen (clp / nb).
INSERT A CLIP AT A DEFINED POSITION IN THE PLAY LIST
The insert mode allows the operator to insert a clip AFTER or BEFORE (this
option is selected in the Setup menu of the remote) the current clip in the play
list. How to proceed ?
1.
Search or browse in the play list until you find the position where to insert
the clip.
2.
Select the clip to insert; select the camera (A, B or C)
3.
Press « INSERT » key (Shift + B) on the remote to insert the selected clip.
It is inserted
after or before the current clip
(depending on the selection
made in the Setup menu) and becomes the current clip. This allows you to
insert clips one after each other without a need to browse.
DELETE A CLIP IN A PLAY LIST
1.
Search or browse the playlist until you reach the clip you want to delete
2.
Press « REMOVE » key (Shift + A) on the remote panel
How to delete a playlist ?
1.
Select the playlist to delete.
2.
Press the CLEAR key and then the F key on the remote corresponding to
the playlist.
