LSM 3 CAM
User's Guide
LSM3CAM_1.09_990629.doc
Page: 10/25
Author : Marianne LOTHAIRE rev B.STAS
Software : LSM4CAM.EXE v.1.09 29/06/99
EVS Broadcast Equipment Email : [email protected] Tel: +32-4-361 7000 FAX: +32-4-361 7099
LAST CUE
This LAST CUE key allows the operator to visualise one of the pre-defined CUE
points. Press the LAST CUE key several times in order to visualise all CUE
points. After the last CUE point is reached, pressing LAST CUE once more will
recall the 1
st
CUE point.
PAGE (SHIFT LAST CUE)
Use this key to select clip page 1 or clip page 2.
FAST
When selected enables FAST pictures search. The actual speed of this fast jog is
adjustable in the SETUP.
RESET
A full reset of the LSM can be done from the remote panel. Press successively
:PLAY - FAST JOG - MARK keys , then confirm the reset by pressing the
with LAST CUE key or cancel by pressing the RECORD key. After confirmation,
the system is reset and restart automatically (restart time might take a couple of
minutes) .
GOTO TC (SHIFT FAST JOG)
This function is used to jump to a particular time code. Press this key, the
following message appears on the program output (PGM) above the current time
code :
« GotoTC : .. : .. : .. ». Use the function keys F1 to F10 to ener the desired time
code (6 digits : hh:mm:ss). After the 6th digit is entered, the LSM3CAM will
automatically reach that time code. If the last digits are 0 (zeros), you don't need
to enter them. Just press ENTER on the remote to validate the entry and reach
the desired picture.
RETURN (SHIFT RECORD)
This function allows the operator to come back to the position where he was
before recalling a clip. This little trick permits to come back to a previous
position, without using the RECORD key and the COMMAND KNOB.
