LSM 3 CAM
User's Guide
LSM3CAM_1.09_990629.doc
Page: 15/25
Author : Marianne LOTHAIRE rev B.STAS
Software : LSM4CAM.EXE v.1.09 29/06/99
EVS Broadcast Equipment Email : [email protected] Tel: +32-4-361 7000 FAX: +32-4-361 7099
CLIP AND PLAY LIST MANAGEMENT
A clip is defined by a SHORT IN and a SHORT OUT
point. When SHORT IN and SHORT OUT points are set,
the system automatically write protects a user definable
length of material before and after the SHORT IN/OUT
points respectively, these are referred to as the GUARD-
BANDS.
Each clip, which is stored on disks will receive an identification number. This
number is in fact a combination of 3 digits: the first one is a
page
, the second one
a
bank
and the third one is the
position
number in this bank.
i.e.
clip n°121 is stored in page #1, bank #2, position #1.
clip n°257 is stored in page #2, bank #5, position #7.
It is possible to store 10 clips in each bank. Nine banks are available by page,
which means the operator can create 180 clips.
It is possible to trim a clip by redefining SHORT IN and SHORT OUT points.
Remarks.
1.
IN & OUT points of a clip cannot be replaced by new ones.
2.
SHORT IN & SHORT OUT points of a clip can be replaced by new ones.
Finally, a play list contains a list of clips and has also an identification number of
two digits (a page and a position within the bank #10). Bank #10 is the play-list
reserved bank. 10 play-list can be created in each bank #10, so 20 playlists can
be defined.
Menu Shift
Enter
Clear
F1
F2
F3
F4
F5
F6
F7
F8
F9
F0
IN
SHORT IN
SHORT OUT
OUT
If SHORT IN and SHORT OUT
points are defined, only the fields
between those two points will be
played if the sequence is recalled
(the same applies when the
sequence is included in a play-
list).
Fields between IN and
SHORT IN and fields between
OUT and SHORT OUT
(
GUARD BANDS
) can be
reached with the command
knob. So the SHORT IN and
SHORT OUT points can be
redefined.
