EVS EPSIO LIVE, User Manual, Page: 64 / 76

EVS Broadcast Equipment SA Issue 1.70.A February 2014
56 Configuration
5. In the Generic tab, click the ellipsis icon on the right of the Pack field, and select
the default graphic pack (.egp file) you want to use.
A static preview of the animation, with the related parameters and associated
commands on the various graphic packs are available as you click the icon.
6. Repeat the steps 4 and 5 for each available tool.
7. Click the
Save button to save the changes in the graphic suite you have created.
The suite whose name is displayed at the top of the Generic tab is the loaded graphic
suite, in other words the suite that will be taken into account as you create animations in
Epsio.
If you want to customize the graphic packs of your graphic suite, refer to the section 2.5.4
‘How to Customize a Graphic Suite’, on page 56.
2.5.4 How to Customize a Graphic Suite
Introduction
Once you have created your graphic suite by assigning predefined graphic packs (as
described in section 2.5.3), you can customize your graphic packs as follows:
1. In the TOOLS tab, Generic tab, and Graphic area, click the
Load
button and select
the graphic suite you want to edit.
The selected graphic suite is loaded.
2. If you want to save your customized graphic suite under a new name, the Save As
button and assign a name to the customized graphic suite.
Otherwise, the changes will be saved in the loaded graphic suite.
3. In the Tool area, select the tool you want to edit the target parameters for from the
Tool drop-down field:
4. In the Target area, select the target you want to customize in the Target drop-down
field:
,
The parameters associated to the loaded target are displayed below the Target field,
or in the table on the right.