EVS EPSIO LIVE User Manual Download Page 61

Page: 61 / 76

USER MANUAL

Epsio Live 1.70

Configuration

Field/Button

Description

The

Pack

field displays the graphic pack

assigned to the tool.

The ellipsis

icon

next to the

Pack

field

enables you to select the graphic pack you want

to work with.

The interrogation mark

next to the ellipsis

icon

gives you access to a PDF document

that includes:

•

a static preview of the animation,

•

the modifiable parameters,

•

the associated commands on the Remote

Panel.

Target Area

In the Target area, you can refine the definition of the various components included in the

graphic pack you have selected in the Pack area. The components of a graphic pack are

called ‘targets’.
This step is optional since you can decide to keep all predefined values of the selected

graphic pack. The parameters you can customize will depend on the type of target you

are editing:

Field/Button

Description

Drop-down field to select the type of target you

want to edit in the selected graphic pack.

Field to select the template image sequence you
will use. When you click on the

, the

application directly points to the folder where the

.tga template sequences are stored.

Note

The template image sequence needs

to be in uncompressed TGA

32-bit

format.

Summary of Contents for EPSIO LIVE













































































Search results

Summary of Contents for EPSIO LIVE

Reviews:

EVS EPSIO LIVE, User Manual, Page: 61 / 76

Search results

Summary of Contents for EPSIO LIVE

Reviews: