EVS EPSIO LIVE, User Manual, Page: 19 / 76

USER MANUAL Epsio Live 1.70
Configuration 11
2.2.2 Epsio Settings on Remote Panel
The settings to activate the Epsio mode, and the default Epsio tool are available in the
Special Effects page of the Setup menu, on page 12.3. The page number can differ
depending on the Multicam version and configuration.
Special Effect p.12.3
[F1]Offside Line: Yes
[F2]External Offside: Yes
[F3]IP Address: xxx.xxx.xxx.xxx
[F4]Default tool: Offside
[F5]Auto Mark: No
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
These settings are described below:
Setting Possible
Values
Description
[F1] Offside
Line
Yes
No (default) Activates the offside line feature, whatever
internal or external.
When the parameter is set to
Yes , the External
Offside
parameter is displayed.
[F2] External
Offside
Yes (default)
No Enables the control of Epsio from the Remote
Panel.
When the setting is set to
No , the offside line
feature built in the EVS server is active.
When the setting is set to
Yes , the Epsio
application is active. The SHIFT+D key in the
Operational menu gives access to the Epsio
menu.
[F3] IP
Address
xxx.xxx.xxx.xxx When the Epsio connection is enabled with the
External Offside parameter, the IP Address of the
Epsio workstation has to be entered in this
parameter to allow the communication between
the EVS server and the Epsio workstation.
[F4] Default
Tool
Offside, Arrow,
Circle, Graphics
When the Epsio connection is enabled with the
External Offside parameter, this parameter
specifies the tool to be activated by default in the
Epsio menu on the Remote Panel.
[F5] Auto
Mark
Yes
No (default) When the Auto Mark parameter is set to Yes , a
cue point is created on the record train where and
each time the user enters the Epsio menu.
Such cue points are the same as the cue points
added manually using the
Mark
key on the
Remote Panel, and are managed the same way.
For more information on cue points, refer to the
Multicam Operation manual.