8
switch is in the on position makes accidents more likely.
Service
Your power tool should be serviced by a qualified specialist using only standard spare parts. This
will ensure that it meets the required safety standards.
Specific safety instructions for circular saw
•
Check lower guard for proper closing before each use. Do not operate without protective guard
or if it is damaged.
•
Remove adjusting key and wrenches key before turning the power tool on
•
During operation maintain a firm grip with both hands for a proper balance and to avoid the
risk of injury by cutting.
•
Protect against kickback. When blade is binding in material processing, release on / off switch
(2) and hold the saw motionless in the material until the blade comes to a complete stop. To
resume work center the blade in the kerf and check that teeth are not engaged into the material,
then press the switch (2) to start.
•
Operate powertool only in working position.
•
Connect powertool to the dust extraction equipment (bag or vacuum cleaner)
Application
Circular saw is used for cutting fast and accurate various materials: wood, plastic, metal, by using
specific discs for each type of material.
IT IS NOT DESIGNED FOR PROFFESIONAL USE.
Description
1.
Main handle
2.
Switch ON / OFF
3.
Lock button against accidental start
4.
Dust tube
5.
Disc guard
6.
Aluminium base plate
7.
Guide rule fixing screw
8.
Angle adjust wing nut
9.
Depth adjustment lever
10. Front handle
11. Guard lever
12. Spindle lock lever
Accessories
13. Guide fence
14. Allen key
15. Circular disk vidia (185 x 20 x 2.5mm)
Assembly
Disconnect the power plug before carrying out any adjustments or maintenance.
Installing a saw blade
1. Press the spindle lock lever (12) positioned near the front handle and rotate the blade until it
