10
Cleaning and maintenance
Before performing any work on the equipment, pull the power plug.
Cleaning
•
Regularly clean the machine housing with a soft cloth, preferably after each use. If the dirt
does not come off use a soft cloth moistened with soapy water.
•
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
Maintenance
Our machines have been designed to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper machine care and regular
cleaning.
Technical data
Voltage/Frequency
230V ~ 50Hz
Input power
1400W
No load speed
4500 rpm
Saw blade diameter
185 mm
Max sawing depth at 90°
63 mm
Max sawing depth at 45°
43 mm
Noise level
LwA= 100.3 dB(A), K = 3 dB(A)
LpA= 89.3 dB(A), K = 3 dB(A)
Vibration level (main handle)
ah,w= 4.257 m/s²
Vibration level (auxiliary handle)
ah,w= 2.352 m/s², k = 1.5 m/s²
Cutting guide
Laser (batteries: 2xLR44)
Laser class
2
Insulation class
II
Degree of protection
IP20
Accessory
Circular disk vidia (185 x 20 x 2.5mm)
Allen key
Dust bag adaptor
Guide fence
Carbon brushes
Weight
5,25 kg
Storage
•
Thoroughly clean the whole machine and its accessories.
•
Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
•
Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
•
Don
’t keep it in plastic bags to avoid humidity build-up.
