10
Personal safety
Always use ear and eye protection when working with the machine or perform maintenance.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from the power tool. Loose clothes, jewellery or long hair can become
entangled in the moving parts.
Service
Your power tool should be serviced by a qualified specialist using only standard spare parts. This
will ensure that it meets the required safety standards.
Specific safety instructions for air compressor
WARNING! Make sure that both air consumption and maximum effective
pressure of pneumatic tools are compatible with the pressure set by the pressure
switch and the volume of air supplied by the compressor.
During operation the compressor and pipes reach high temperatures. Contact causes burns.
Keep a minimum distance of 4 meters between the compressor and working are
The compressor gases must not contain substances that could lead to fire
or explosion in the compressor.
During operation, to ensure correct lubrication,the compressor must be placed on a stable
horizontal surface.
To ensure optimal cooling, the compressor will be placed at a minimum distance of 50 cm
from the wall.
When uncoupling, the hose will be held by hand to avoid injury from thrown back by
pressure.
Always wear safety goggles to protect your eyes from flying objects that may be lifted by jet.
Do not weld the tank .In case of faults or corrosion, is necessary to be replaced immediately.
Avoid using air pipes and power extension cables with excessive length.
To extend operating life, the compressor must be used in a suitable environment,
“( well-
ventilated, and never in places affected by dust, acids, vapors, explosive or flammable gas at
an ambient tempe 5 ° C ... + 40 ° C.
The machine is double insulated. This means it has two completely independent types of
insulation that prevents the operator to enter into direct contact with the metal parts. This
measure represents the highest degree of protection against electrocution.
Application
This tool is intended for personal use for for the production of compressed air. DO
NOT RUN THE COMPRESSOR WITH ANY OTHER TYPES OF GAS
Operations: swelling, operations that require connection of pneumatic tools, painting, washing with
aqueous detergent, by following the specific rules.
IT IS NOT DESIGNED FOR PROFFESIONAL USE.
Description
1.Air filter
9. Transport handle
2. Pressure tank
10.Safety valve
3. Wheel
11.Drain valve
4. Support foot
12.Pressure gauge for tank
5.Quick coupling for adjusted pressure
13.Oil level eyehole
6. Pressure gauge for adjusted pressure
14.Oil filling cap
7. Pressure regulator
15.Oil discharge screw
8. On/Off switch
16.Quick coupling for pressure tank takeover
