2. Safety
DEPOLOX® Pool E flow cell
6
EN
2.
Safety
2.1
Intended use
The DEPOLOX® Pool E flow cell in combination
with the installed sensors and 700 P electro-
nics module is intended exclusively for the
measurement and control of the treatment of
water in swimming pools and baths.
The operational safety is only guaranteed if
the DEPOLOX® Pool E flow cell is used in accor-
dance with its intended application. The
DEPOLOX® Pool E flow cell may only be used
for the purpose defined in the order and
under the installation, operating and ambient
conditions specified in this instruction
manual.
All inspection and maintenance work must be
carried out at the specified intervals.
Compliance with the intended use also inclu-
des reading this instruction manual and obser-
ving all the instructions therein.
The owner/operator of the installation bears
sole responsibility for consequences of any
use that does not conform with the installa-
tion’s intended use.
2.2
General safety instructions
The manufacturer places great emphasis on
safety when working on or with the DEPO-
LOX® Pool E flow cell. This is taken into
account, starting with the design of the instal-
lation, by the integration of safety features.
Safety regulations
The safety instructions in this documentation
must be observed at all times. Additional
industry-wide or in-house safety regulations
also continue to apply.
Safety instructions on the flow cell
All safety instructions attached to the flow cell
must be observed. These instructions must
always be clearly legible and complete.
State-of-the-art technology
The flow cell has been constructed in accor-
dance with the technological state-of-the-art
and the accepted rules of safety engineering.
However, if the flow cell is used by persons
who have not been adequately instructed,
danger to the life and limb of such persons or
third parties and damage to the unit itself or to
other property cannot be ruled out. Work not
described in this instruction manual must be
performed only by authorized personnel.
Personnel
The operator of the overall system must
ensure that only authorized and qualified spe-
cialist personnel are permitted to work with
and on the flow cell. “Authorized specialist
personnel" are trained, skilled personnel emp-
loyed by the owner/operator, the manufactu-
rer or, if applicable, the service partner. Work
on electrical components must be carried out
by qualified electricians.
Spare parts / components
Trouble-free operation of the flow cell is only
guaranteed if original spare parts and compo-
nents are used in precisely the combination
described in this instruction manual. Failure to
observe this instruction may lead to malfuncti-
ons or damage to the flow cell.
Extensions and conversions
Any modifications, extensions or conversions
to the flow cell that could impair its safety
require the written approval of the manufac-
turer.
Electrical power
Only qualified electricians or trained person-
nel supervised by a qualified electrician are
permitted to perform any work on electrical
components and must do so in accordance
with valid electro-technical regulations.
During normal operation, the controller must
remain closed. Connect power cables in accor-
dance with the wiring diagram.
DANGER
Risk of injury or death!
The DEPOLOX® Pool E flow cell must not be
operated with flammable liquids
DANGER
Risk of injury or death!
External voltages may still be connected
even if the operating voltage is switched off.
