Part 3 - Remote Setup
40
•
Network Recording Failover
: Select a network
recording failover mode. You can recording video on
the SD card when recording from the remote program
fails. Video is recorded using the stream designated
under
Recording Stream > Event
.
Not supported if the recording mode under the
Schedule
tab is set to
Always
>
Time-Lapse
.
-
Off
: Disables Network Recording Failover.
-
Always
: Records video continuously until recording
from the remote program becomes functional
again, regardless of the recording schedule.
-
On SD Schedule
: Records video based on the
recording schedule set up under the
Schedule
tab
until recording from the remote program becomes
functional again.
• Recordings saved on the SD card can be searched
and played back from the SiRiS Lite program or
remotely from the remote program. For more
information, refer to each program's
operation
manual
.
• Video search and playback may not function
properly on the remote program while video is
being recorded on to the SD card.
To remove the SD card, unselect the
Record
option
and wait 30 seconds before doing so. Removing the
SD card while recording is in progress of without
waiting 30 seconds can damage the system and/or the
recording data.
Event
Configure event detection settings.
IDVF320IR / VD320IR / IDVF430IR / VDVF430IR
ID420-FFIR4
Summary of Contents for VDVF430IR
Page 1: ...2 3MP Int Ext IR Dome Camera User Manual...
Page 61: ......
