Part 3 - Remote Setup
38
•
Settings
: Configure image and upload settings.
-
Upload Type
: Choose an upload type. Select
Always
to upload images using the settings below,
irrespective of event detection. Select
Event
to
upload images using the settings below when an
event is detected.
-
Upload Frequency
: Activated only when Upload
Type has been set to
Always
. Designate the upload
speed. The specified number of images will be
uploaded to the FTP server during the specified
period of time.
-
Upload 1 image per
: Activated only when Upload
Type has been set to
Event
. Designate the upload
speed. Select
Upload
for and specify a duration.
Images will be uploaded for the specified duration
at the specified upload speed. Select
Upload while
event status is active
to upload images at the
specified speed only while event status is active.
-
Resolution/Quality
: Choose the resolution and
quality of the images to upload to the FTP server.
Range of resolution settings you can use here can
vary depending on the resolution setting applied
under
Video > Streaming
.
-
Base File Name
: Enter a name for the files to be
uploaded to the FTP server and then choose file
identification options. Select
Add Date/Time Suffix
to add event detection date and time information
to each image file. Select
Add Sequence Number
Suffix - max. Count
to number the image files
based on the order of event detection. Select
Overwrite
to overwrite the previous image with
the new image. Event type is automatically added
to the file names.
• When specifying the
Upload Path
or
Base File
Name
, you cannot use special characters such as \, /,
#, *, |, :, ", <, >, and ?.
• If different resolution settings have been applied to
each stream under
Video > Streaming
, resolution
of images uploaded to the FTP server will match the
resolution setting set for Tertiary.
• Set speed settings for Upload Frequency and
Upload 1 image per options in consideration of the
FTP server's performance. FTP uploads can fail if the
configured speed is higher than what the FTP server
can handle.
Record
IDVF320IR / VD320IR / IDVF430IR / VDVF430IR only
Select
Record
to record video on the SD card. First,
make sure that an SD card (Class 6 or higher) has been
properly inserted.
•
Total Capacity
: Indicates the SD card's total capacity
if it has been inserted properly.
•
Format SD Card
: Click on this button to format the
inserted SD card. Formatting the SD card erases all
data saved on the card.
This function is only supported for users in
Administrator
group.
•
Record Audio
: Enable/disable audio recording.
Summary of Contents for VDVF430IR
Page 1: ...2 3MP Int Ext IR Dome Camera User Manual...
Page 61: ......
