Dear Customer,
thank you for choosing the EVOLVEO StrongVision R1.
We believe you will enjoy a lot of fun and happiness.
Before First Use
Insert batteries with the correct polarity (8x AA / 1.5 V) into the camera.
For best performance we recommend using branded high-quality alkaline or lithium
batteries, which last long and work reliably even at low temperatures.
Rechargeable batteries are not suitable and may not be correctly detected by the
camera, they tend to discharge quickly and they are unreliable at low temperatures.
You can also use an external 9 V power supply.
Insert the SDHC card and make sure it is not write locked.
Three position switch
1.
"OFF" position - camera is off
It is possible to replace the SDHC card or the batteries.
2.
"ON" position - camera is on
3.
"TEST" position - a special mode
View the SDHC card content on the display of the camera or connect the camera to a
PC via USB cable and view the content on your PC.
Three operating modes
1.
Photo - photos only
2.
Video - video only
3.
Photo and video - at first the camera takes a photo, than starts to shoot a video
There are two ways how to take a photo or shoot a video
1.
manually - using a remote control - set the switch "TEST" position and press "OK"
2.
automatically motion detection) - set the switch to "ON" position, the LED will shine
for 10 seconds - when the camera detects a motion, it takes a photo or shoots a
video
Terms explanation
INTERVAL
set the time interval for the next motion detection
e.g. 1 s, 5 s, 10 s, 30 s, 1 min, 5 min, 10 min, 30 min
TIMER
set the time when the camera will detect motion
e.g. from 10:00:00 to 11:30:00
FORMATTING
formatting (full erase) the SDHC card content
MULTIPLE
multiple shots at the same time 1, 3, 6, 9
