10
www.evolutionpowertools.com
WARNING:
the operation of any mitre saw
can result in foreign objects being thrown
towards your eyes, which could result in severe
eye damage. Before beginning power tool
operation, always wear safety goggles or safety
glasses with side shield or a full face shield
when necessary.
WARNING:
If any parts are missing, do not
operate your mitre saw until the missing parts
are replaced. Failure to follow this rule could
result in serious personal injury.
ADDITIONAL SAFETY ADVICE
CARRYING YOUR MITRE SAW
Safety Advice
•
although compact, this Mitre Saw is
heavy. To reduce the risk of back injury,
get competent help whenever you have to
lift the saw.
•
To reduce the risk of back injury, hold
the tool close to your body when lifting.
Bending your knees so you can lift with
your legs, not your back. Lift by using
the handhold areas at each side of the
machines base.
•
Never carry the Mitre Saw by the power
cord. Carrying the Mitre Saw by the power
cord could cause damage to the insulation
or the wire connections resulting in
electric shock or fire.
•
Before moving the Mitre Saw tighten the
mitre and bevel locking screws and the
sliding carriage locking screw to guard
against sudden unexpected movement.
•
Lock the Cutting Head in its lowest
position. ensure that the Cutting Head
Locking Pin is completely engaged in its
socket.
WARNING:
Do not use the blade guard as a
‘lifting point’. The power cord must be removed
from the power supply before attempting to
move the machine.
•
Lock the Cutting Head in the down
position using the Cutting Head
Locking Pin.
•
Loosen the Mitre angle Locking Screw.
Turn the table to either of its maximum
settings.
•
Lock the table in position using the
Locking Screw.
•
Use the two carry handle cut-outs
machined into either side of the machine
base, to transport the machine.
Place the saw on a secure stationary work
surface and check the saw over carefully.
Check particularly the operation of all the
machines safety features before attempting to
operate the machine.
GETTING STARTED - UNPACKING
CAUTION:
This packaging contains sharp
objects. Take care when unpacking. This
machine could require two persons to lift,
assemble and move this machine. Remove
the machine, together with the accessories
supplied from the packaging.
Check carefully to ensure that the machine
is in good condition and account for all the
accessories listed in this manual. also make
sure that all the accessories are complete. If
any parts are found to be missing, the machine
and its accessories should be returned together
in their original packaging to the retailer.
Do not throw the packaging away; keep it safe
throughout the guarantee period. Dispose of
the packaging in an environmentally responsible
manner. Recycle if possible. Do not let children
play with empty plastic bags due to the risk of
suffocation.
ITEMS SUPPLIED
DESCRIPTION
QTY
Instruction Manual
1
Hold Down Clamp
1
Hex Key 5mm (Blade Change)
1
Multipurpose Blade
1