5
1. Secure the engine mount on the airplane
firewall. Tighten the engine mount screws in
the firewall.
2. Install the engine on the engine mount
according to the airplane manufacturer’s
instructions.
WARNING:
Tighten all engine mounting
screws before each flight. If you do not
tighten the engine mounting screws, the
screws may vibrate loose and cause the
engine to separate from the fuselage.
Included Content
Engine
EVOA107
Evolution
®
/Spektrum
™
Telemetry RPM Adapter Cable
EVOA121
Sintered Plastic Filter Clunk
EVOG10300
Ignition Unit
EVOG10350
Spark Plug
EVOG15601
Muffler
EVO9191A
Muffler Screws & Gasket
Optional Items
APC13060 (APC14060)
13 x 6 propeller (break-in) (14 x 6 propeller (normal flight))
EVOA100
Optical Electronic Ignition Kill Switch
EVOA102 (EVOA103)
Medium Gas-FKM Fuel Tubing 1 meter (3 meters)
EVOA112
Evolution 3 Wire Ignition/Receiver Switch
EVOM9
15cc Inverted Wraparound Muffler
EVOX1001Q
Evolution Synthetic 2-Cycle Oil
HAN155
Ultra Fuel Pump
HAN156
Tachometer
Installing the Engine
A
B
C
D
E
G
F
A.
Spark Plug
B.
Muffler
C.
Low-speed Needle
D.
Throttle Arm
E.
Fuel Nipple
f.
High-speed Needle
G.
Crankcase Pressure
Port