INSTALLATION AND OPERATING MANUAL
Aquarium UV Steriliser
Complete instructions for all models of evoUV Aquarium Steriliser
WARNING:
Evolution Aqua Ltd. -
Evolution House - Kellet Close - Wigan - Lancashire - United Kingdom - WN5 0LP
t
+44 (0) 1942 216554 -
f
+44 (0) 1942 418489 -
e
w
www.evolutionaqua.com
UK/EU
English
• Ensure that the unit is
switched off
at the mains before you attempt to conduct
any type of maintenance on the evoUV.
• Ensure the unit is installed in the recommended orientation.
• Fit the quartz sleeves and O-rings and switch on pump to check that unit is water
tight before fitting the bulb, bulb socket and end cap.
• Ensure that the end cap is tight before running the unit.
• After replacing bulbs or before tightening the end cap, make sure that the O-Rings
are in the correct position, and the bulb sockets are dry.
• Should the electrical connections get wet, please dry thoroughly before switching
power on.
EVOAQUA1301020191MAN
Affix serial number here
Summary of Contents for evoUV
Page 19: ...19...
