Evolite Evo Spot 180, User Manual

Page: 23 / 24

Evo Spot 180 User’s Manual Ver. 1.00 Page
23
13 13
0..225 max to min speed
226..235 blackout by movement
236..245 blackout by all wheel changing
246..255 no function
1 4 1 4
Special function
0..19 No function
20..29 No function
30..39 Gobo Change to any position
40..79 No function
80..84 All Motor reset
85..87 Scan motor reset
88..90 Colors motor reset
91..93 Gobo motor reset
94..96 no function
97..99 Other motor reset
100..119 Internal program 1
120..139 Internal program 2
140..159 Internal program 3
160..179 Internal program 4
180..199 Internal program 5
200..219 Internal program 6
220..239 Internal program 7
240..255 Internal Sound program 1
Vector Mode Value
Function
15
Color Time
0..255 max to min speed
16
Gobo Time
0..255 max to min speed

Maintenance & service
o
Cleaning
The cleaning of internal must be carried out periodically to optimize light output. Cleaning frequency depends
on the environment in which the fixture operates: damp, smoky or particularly dirty surrounding can cause
greater accumulation of dirt on the fixture’s optics.

Clean with soft cloth using normal glass cleaning fluid.

Always dry the parts carefully.

Clean the external optics at least every 20 days.
o
Troubleshooting
Following are a few common problems that may occur during operation. Here are some suggestions for easy
troubleshooting:

The fixture does not work, no light
o
Check the connection of power and main fuse.
o
Measure the mains voltage on the main connector.

Not responding to DMX controller
o
DMX LED should be on. If not, check DMX connectors, cables to see if link properly.
o
If the DMX LED is on and no response to the channel, check the address settings and DMX
polarity.
o
If you have intermittent DMX signal problems, check the pins on connectors or on PCB of the