53
S
Sm
ma
arrtt C
Ca
arrd
d C
Co
on
ntta
ac
ctt S
Stta
attiio
on
n
Securion printers with a Smart Card Contact Station are called Securion Smart printers. The wor-
king mode of a Securion Smart printer is identical to that of a Securion printer.
The Smart Card Contact Station of the Securion Smart enables the chips to be programmed to the
ISO 7816-2 standards.
L
Lo
oc
ca
attiio
on
n o
off tth
he
e c
co
on
ntta
ac
ctt s
stta
attiio
on
n
The Contact Station is a module installed in the factory on
Securion Smart printers.
The Contact Station is positioned over the path of the cards and
before the print head. To contact the Station, the chip card is
placed under it and is pushed up.
The programming sequence of a chip is always car-
ried out before the card is printed.
Only use chip cards conform to ISO 7816-2.
Never print on the chip.
C
Ca
arrd
d o
orriie
en
ntta
attiio
on
n
Chip cards must be installed in the card feeder so that the chip is downwards, as shown below:
max.
max.
max.
2.
Lower the spring
system as shown
and insert 100
chip cards of 0.76
mm (30mil) at
most (chip
downwards).
1.
Remove the
feeder from the
printer as
shown.
3.
Put the feeder back in
the printer. Then press
on the top of the feeder
until it clicks.