15
S
Se
ettttiin
ng
g p
pa
arra
am
me
ette
errs
s
Defining the parameters of the printer and of its driver is a
highly important step and requires very special attention.
As a matter of fact, a poorly-defined film, or improper
settings, are factors that have a negative impact on the quality
of personalization.
It is therefore essential to proceed in stages, changing the
parameters only when you are completely sure.
Evolis gives you at all times the ability to return to the ‘factory’
settings if the adjustments made do not give the expected results.
The application of an improper lamination station heating temperature can result in the
destruction of the card and of the film, and, in extreme cases, can affect the station itself.
Be careful about defining the personalized parameters and do not hesitate to contact your
Evolis dealer to get the necessary advice and assistance prior to any modification.
W
Wiin
nd
do
ow
ws
s p
prriin
ntt d
drriivve
err
The Evolis Securion printer works on Microsoft Windows platforms:
Windows XP, 2003 and Vista 32 and 64-bits
IIn
ns
stta
alllla
attiio
on
n o
off tth
he
e p
prriin
ntt d
drriivve
err
To install your print driver, you will need the CD-Rom ‘Drivers and Documentation’ shipped with your
Securion printer.
Please make sure the data cable is disconnected before starting this procedure.
The installation program automatically selects the version to be installed in terms of your
operating system.
2
2
2
2