ä
Inadequate print quality
Ê
The print and erase settings need to be altered
Lack of contrast: increase the contrast in the print driver configuration.
Partial erase: adjust the temperature in the print driver configuration.
Quality still inadequate: adjust the print quality in the print driver configuration. Please note that this setting alters the
print speed. It is recommended only where the first two adjustments have not given satisfactory results.
Ë
The type of rewritable cards used may be unsuitable
Check that the type of rewritable cards used matches the specifications set out in Appendix A.
Ì
The card has a rough texture or the card is not perfectly flat
Try printing with another type of card.
Owing to the use of a thermal printing process, the card needs time to be left to cool before reprinting. If this
is not done, partial erasing of the previous image is observed. A few seconds are typically enough. Similarly,
standard contrast is reached a few seconds after the card has been printed.
After printing, it is recommended to wait a few seconds for the CARD TIME DELAY LED to go out before reprinting
the same card and/or altering the printer’s settings. This does not stop another card being printed or re-printed.
4
32
