manualshive.com logo in svg

Evolis EDIKIO FLEX, User Manual

Share
Download
Evolis EDIKIO FLEX User Manual Download Page 28

EDIKIO

FLEX

28

WARNINGS AND DIAGNOSTIC MESSAGES (continued)

RIBBON
• No ribbon in the printer.

• End of ribbon.

• The ribbon is not correctly fitted.

• The ribbon is torn.

• The ribbon is not recognized.

Check the condition of the ribbon in the 

printer. If you have a print job in progress, 

this restarts with a new card.

CARDS
• No cards in the card feeder.

Reload cards into the feeder – the process 

starts again.

• Error loading cards.

Check the cards are loaded. For any other 

problems, contact your Edikio by Evolis 

reseller.

PRINTER READY
•  The printer is ready to 

receive data.

PROCESSING
• The printer is receiving data.

PRINTER COVER OPEN 
• The printer cover is open.

Close the cover. The printer restarts.

MECHANICAL ERROR
• Card jammed in the printer.

• Mechanical component fault.

Open the cover and hold down the control 

button to eject the jammed card. For more 

details, refer to page 34.
If the problem persists, contact your Edikio 

by Evolis reseller for assistance

.

Summary of Contents for EDIKIO FLEX














































Reviews:

No comments

Brands by name

Popular brands

Load more brands