Chapter 1 Basics
4
Importing contents
From Computer
The Reader supports USB Mass Storage Device
function.
To import contents (ebooks, photo etc) into the reader,
connect the reader to PC via the supplied USB cable.
Upon successful connection to PC, the reader will enter
USB mode and all operation will be halted.
Go to [My Computer],
double click on the reader’s disk to
open.
Perform the file management operation like USB device.
From memory card
This unit supports micro SD card up to 32GB.
To insert a memory card
Insert the card correctly with the contact pin facing
downwards as illustrated below. Pushing the card in, then
you should hear a click when the reader is seated correctly.
You may damage the card and the reader if micro SD card is
not inserted correctly.
To remove micro SD card, push the card once again until it
contact the back of the slot.
