Chapter 1 Basics
3
Seconds again.
Charging the Reader
You need to charge the reader prior to using it for the first
time or when battery power is low.
Charge the reader using AC adapter with output 5V,
1.5A.
Charging through PC may not be able to fully charge the
reader
due
to
the
low
output
charg
ing current from PC USB port.
Please turn the reader to standby mode to shorten the
charging process.
It will take about 4 hours to fully charge the reader in
standby mode .
When the reader enters into standby mode, press the
Power
button to wake up the reader.
The battery status is displayed at the bottom left corner.
The status is shown as below:
Low battery Charging Battery full
