EvoJet B110neo, Manual

Page: 39 / 43

B110neo – B170neo – B220neo – Instructions 6.0
Airspeed Sensor [8135]
The JETRONIC allows the connection of an optional airspeed sensor to the AUXiliary connector.
For the measurement, a pitot tube (Prandtl type) and an electronic pressure sensor are used. The
tube is mounted on the outside of the model in flight direction and the sensor is mounted inside the
model. The two components are connected via the two included pieces of tubing.
The measurement of the airspeed in flight allows several useful functions:
●
Determining the (maximum) airspeed [km/h] (see INFO:15 AIRSPEED-PEAK)
●
Determining the covered total distance [km] flown (see INFO:16 AIR-DISTANCE)
●
Limiting the airspeed to a value allowed for the airframe model
(always or switchable).
Installation
Activation
✔
Set R/C-SETTINGS:59 AUX-MODE to AIRSPEED.
✔
Set LIMITS:37 AIRSPEED-MAX to the desired speed in km/h.
✔
To us the AIRSPEED-LIMITER switchable on/off from the Radio, connect the Jetronic-input
RC2 with the switch-channel at your R/C receiver and activate R/C-SETTINGS:54 RC2-
MODE to the value AIRSPEED.
39