Jetronic-BOX HV Instructions 2.1
17:AIR-NOMINAL
Specifies the nominal air pressure for the LED display (11:INFO-LED).
This parameter should be set to the pressure value nominally required for the model to take off.
Range: 14:AIR-FAIL – 10 bar
Default setting:
8.0 bar
18:SET-DOORSEQ.
Resets the JETRONIC-BOX to the factory settings, a typical '
Doorsequencer'
.
See page 4 and page 5 for the overview and description.
Default setting:
NO
Set value to
YES
and push the
SET
-key two times.
Landing Gear with different Door Controls RC4 / RC5
RC3
: The
landing gear
waits 1 second before retraction/extension.
RC4
: The
door type-1 closes always automatically
after a delay of 8 seconds (gear
extended) and after a delay of 6 seconds (gear retracted).
RC5
: The
door type-2 stays extended open
closes after a delay of 7 seconds (gear
retracted).
RC2
: A brake valve is controlled by a mixing function in the transmitter when the gear is
extended, e.g. from +100% to +150%.
19:FIRMWARE
Shows the actual firmware version.
Value:
2.1
10