1300 859 933
www.evoheat.com.au
Evo315-C Manual
Page 12
6.2.10 Vacation Mode
Vacation Mode allows you to turn the unit off to conserve power for an extended period of time, and
restart operation on a date you specify. This ensures you have hot water waiting for you upon your return.
Ensure the unit is ‘
OFF
’ before setting vacation mode. The date you set in this mode will determine what date the unit
starts back up.
After selecting vacation mode, press and hold
for 2 seconds, the ‘month’ value will begin to flash in the display
area. Press the
UP
or
DOWN
arrows to display the desired month, then press
to confirm and move to altering the
‘day’ value.
The ‘day’ value will flash when it is selected, use the arrow keys to select your desired start day, then press
to
save all changes and exit back to the main interface.
Note: Format is
mm/dd
Example: The unit will
start up on September
the 28
th
.
6.2.11 Fan/Ventilation Function
This function may come in useful if the system is installed inside and the fan settings need to be adjusted
to suit ducting or external ventilation.
The fan speed
(High Speed, Low Speed or Off)
can be controlled by the fan mode on the controller.
Fan mode symbols:
High Speed
Low speed
No Fan Icon: off
Note: When H02 is set to 0, there is no ventilation function.
Note: when the compressor is on, the fan will always run at high speed.
When the parameter HO2 is set to 1, press the
for 2s.
Once you hear a beep you can set the ventilation mode. Press
for 2s, this will change the fan speed.
Continue to press
for 2s until you reach your preferred speed.
Summary of Contents for Evo315-C
Page 1: ......
