background image

6.Appendix

14

6.2  Cable  specification

When the unit will be installed at outdoor, please use the cable which can against UV.

1. 

  

Single phase unit

10~16A
16~25A
25~32A
32~40A
40 ~63A

63~75A
75~101A
101~123A
123~148A
148~186A
186~224A

Phase line

MCB

Creepage protector

Signal line

2

×

n 0.5mm

Nameplate 

maximum 

current

Earth line

No  more 
than 10A

2

2

×

1.5mm

2

2

×

2.5mm

2

2

×

4mm

2

2

×

6mm

2

2

×

10mm

2

2

×

16mm

2

2

×

25mm

2

2

×

25mm

2

2

×

35mm

2

2

×

50mm

2

2

×

70mm

2

2

×

95mm

20A
32A

40A

40A

63A
80A

100A

125A

160A

225A

250A

280A

2

1.5mm

2

2.5mm

2

4mm

2

6mm

2

10mm

2

16mm

2

mm

25

2

mm

25

2

35mm

2

50mm

2

70mm

2

95mm

30mA less than 0.1 sec

10~16A

16~25A
25~32A
32~40A
40 ~63A

63~75A

75~101A

101~123A

123~148A

148~186A

186~224A

Phase line

MCB

Creepage protector

Signal line

2

×

n 0.5mm

Nameplate 

maximum 

current

Earth line

No  more 
than 10A

20A
32A
40A
40A

63A
80A

100A

125A

160A

225A

250A

280A

2

1.5mm

2

2.5mm

2

4mm

2

6mm

2

10mm

2

16mm

2

mm

25

2

mm

25

2

35mm

2

50mm

2

70mm

2

95mm

2. Three

  

 phase unit

2

3

×

1.5mm

2

3

×

2.5mm

2

3

×

4mm

2

3

×

6mm

2

3

×

10mm

2

×

16mm

3

2

×

25mm

3

2

3

×

25mm

2

3

×

35mm

2

3

×

50mm

2

3

×

70mm

2

3

×

95mm

30mA less than 0.1 sec

30mA less than 0.1 sec

30mA less than 0.1 sec

30mA less than 0.1 sec

30mA less than 0.1 sec

30mA less than 0.1 sec

30mA less than 0.1 sec

30mA less than 0.1 sec

30mA less than 0.1 sec

30mA less than 0.1 sec

30mA less than 0.1 sec

30mA less than 0.1 sec

30mA less than 0.1 sec

30mA less than 0.1 sec
30mA less than 0.1 sec

30mA less than 0.1 sec

30mA less than 0.1 sec
30mA less than 0.1 sec

30mA less than 0.1 sec

30mA less than 0.1 sec

30mA less than 0.1 sec

30mA less than 0.1 sec
30mA less than 0.1 sec

6.Appendix

13

1. The unit can only be repaired by qualified installer centre personnel or an authorised 
     dealer.

for Europe market

2. This appliance is not intended for use by persons (including children) with reduced physical
    sensory or mental capabilities, or lack of experience and knowledge, unless they have been
    given supervision or instruction concerning use of the appliance by a person responsible for 
    their safety. 

for Europe market

    Children should be supervised to ensure that they do not play with the appliance.
3. Please make sure that the unit and power connection have good earthing, otherwise may 
    cause electrical shock.
4. If the supply cord is damaged, it must be replaced by the manufacturer or our service agent
    or similarly qualified person in order to avoid a hazard.
5. Directive 2002/96/EC (WEEE): 
    The symbol depicting a crossed-out waste bin that is underneath the appliance indicates 
    that this product, at the end of its useful life, must be handled separately from domestic
    waste, must be taken to a recycling centre for electric and electronic devices or handed 
    back to the dealer when purchasing an equivalent appliance. 
6. Directive 2002/95/EC (RoHs): This product is compliant with directive 2002/95/EC (RoHs) 
    concerning restrictions for the use of harmful substances in electric and electronic devices.

7. The unit CANNOT be installed near the flammable gas. Once there is any leakage of the gas
     , fire can be occur.
8. Make sure that there is circuit breaker for the unit, lack of circuit breaker  can lead to 
    electrical shock or fire.
9. The heat pump located inside the unit is equipped with an over-load protection system. It 
    does not allow for the unit to start for at least 3 minutes from a previous stoppage.
10. The unit can only be repaired by the qualified personnel of an installer center or an 
     authorized dealer. 

for North America market

11. Installation must be performed in accordance with the NEC/CEC by authorized person only.
    

for North America market

12. USE SUPPLY WIRES SUITABLE FOR 75

.

13. Caution: Single wall heat exchanger, not suitable for potable water connection.

6.1  Caution & Warning

Summary of Contents for CS57


















Reviews: