background image

Page 4. 

Safety / Handling of Transport Wheelchairs

 

 
Safety and handling of the transport wheelchair requires the close attention of the 
transport wheelchair user as well as the assistant.  This manual points out the 
most common procedures and techniques involved in the safe operation and 
maintenance of the transport wheelchair.  It is important to practice and master 
these safe techniques until you are comfortable in manoeuvring around the 
frequently encountered architectural barriers. 
 
Use this information only as a basic guide.  The techniques that are discussed on 
the following pages have been used successfully by many users. 
 
Individual transport wheelchair users often develop skills to deal with daily living 
activities that may differ from those described in this manual.  All warnings and 
cautions given in this manual MUST be followed. 
 
Techniques in this manual are a starting point for the new transport wheelchair 
user and assistant with safety as the most important consideration for all.  
 

Stability and Balance

 

 
To assure stability and proper operation of your transport wheelchair, you must at 
all times maintain proper balance.  Your transport wheelchair has been designed 
to remain upright and stable during normal daily activities as long as you do not 
move beyond the centre of gravity. 
 
Virtually all activities which involve movement in the transport wheelchair have an 
effect on the centre of gravity.  Use the adjustable seatbelt for additional safety. 
 
DO NOT lean forward out of the transport wheelchair any further than the length 
of the armrests.  Make sure the castors are pointing in the forward position 
whenever you lean forward.  This can be achieved by advancing the transport 
wheelchair and then reversing a little  in a straight line.

 

Summary of Contents for LM9712
















Reviews: