Page 10.
WARNING
After any adjustments, and before use, make sure all attaching hardware is
tightened securely. Otherwise, injury or damage may result.
Replacing Seat Upholstery
NOTE: for this procedure, refer to FIGURE 9.
1.
Remove the screws that secure the
existing seat upholstery to the
crossbraces.
2.
Remove the existing seat upholstery from
the crossbraces.
3.
Securely tighten the new seat upholstery
to the crossbraces with the screws.
Unfolding / Folding the Fold-Down Back
NOTE: For this procedure refer to FIGURE 7.
Folding
1.
Disengage the release mechanism on the back
frame tubes.
2.
Push the handles down.
Unfolding
WARNING
When unfolding the back, ensure all
occupant’s and/or assistant’s body parts
are away from the folding mechanism.
Otherwise, pinching and injury may occur.
Make sure the release levers are securely
locked in place before using the transport
wheelchair.
1.
Pull up on the two back frame tubes until the
release mechanisms lock in place.
NOTE: There will be an audible click.
2.
Pull on the handles to make sure the back is
locked in place.
Replacing Back Upholstery
NOTE: For this procedure, refer to FIGURE 8.
1.
Remove the screws and washers that secure the
existing back upholstery to the back frame tubes.
2.
Position new back upholstery on the back frame
tubes.
3.
Securely tighten the new back upholstery to the
back frame tubes with the screws and washers.
Summary of Contents for LM9712
Page 2: ......
