KH407 5 TWIN BOOM
3.
HANDSET:
2.1
RAISE/LOWER:
The hoist operates via a touch pad handset. The top two switches on the
handset are for raising and lowering. To raise or lower the hoist, simply
press the required switch on the pad. (Fig 4)
Fig 2
2.2
LEG GATING:
To OPEN or CLOSE the “Gate” on the legs, simply press the lower two
switches on the handset. (Fig 2 shows the lower sets of switches are for the
leg “gate”). Open on the left, close on the right.
3
HOOK ON ATTACHMENTS eg :-YOKE (Fig 3)
Refer to the fitting instructions supplied with your chosen sling
.
Fig 3
Fig 3A
Fig 3A is the hook, release the top pin and raise the attachment to remove it.
IMPORTANT
: PIN MUST ENGAGE SO ATTACHMENTS DON’T COME OFF WHEN
IN USE.
4
BATTERY CARE AND CHARGING:
4.1
CHARGING:
Before the hoist can be operated the battery pack will need to be charged.
Please follow the instructions below.
4.2
Plug the charger unit (Fig 4) into the 240 Volt supply outlet. The unit is now
ready to accept a battery that requires charging, a
GREEN
L.E.D. (ON) will
be displayed.
4.3
To charge the battery, simply locate the battery on the mount bracket and
clip into position. (The
GREEN
and
ORANGE
L.E.D. on the front of the
charger will be displayed). The battery is fully charged when the
ORANGE
L.E.D. is OFF and only the
GREEN
L.E.D. is displayed
.
