KH407 4 TWIN BOOM
SAFETY PRECAUTIONS.
For safety precautions only properly trained personal should use the hoist.
1. The KH 407 hoist is manufactured and tested with safety and function for the carer and
patients as the utmost importance. No parts should be removed from the hoist without
approval as this may create an unsafe working condition.
2. The
MAXIMUM
safe working load is
225 Kg’s.
Always use the correct slings on the hoist.
3. EMERGENCY STOP
This is the big RED switch, located on the front of the controller. If there is a need to use
this, simply depress the switch and it will automatically lock the position and cut all power to
the electrical system. To disengage the emergency stop switch after it has been
depressed, turn the switch in a clockwise direction and the switch should return to its
original position.
4. EMERGENCY LOWERING/RAISING:
The emergency lowering/raising buttons can be used to lower/raise the hoist if there is an
electrical or handset failure. The switches are located on the controller under the big red
emergency stop switch. Simply press, using a ball point pen or similar object.
5. The hoist should not be used on rough or sloping surfaces. ie. Wheel chair ramps etc, and
does not recommend that the hoist be used outdoors.
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS:
1.
INSTALLATION OF BATTERY PACK.
2.
Before the HOIST can be operated the battery pack will need to be placed on
charge (See 2.1.2 - For Charging Battery).
Minimum 4 hours for flat battery.
When the battery pack is fully charged, remove the battery from the charger and
place on the hoist. Simply locate the battery on the mounting bracket and clip the
release lever into the secure position. The Twin Boom is now ready for use.
Fig 1
