Appendix
PPC-1006
· 25 ·
8. Appendix
8.1 Troubleshooting and Solutions
Common
Malfunctions
Reasons
Troubleshooting and Solution
No power supply
Please check whether the power
connector is correctly connected.
Make sure the power switch is
set to ON.
The device is not
operating
The input power supply
voltage is not within the
voltage range supported
by the system.
Maybe the system is under
over-voltage or under-voltage
protection, please examine
whether the input voltage is
within the allowed range.
The display is under
“power saving” mode
Press any key on the keyboard.
The luminance control is
set to “Black”.
Increase the screen luminance by
luminance control. Please refer
to the instructions of the display
for detailed information.
The screen is
black
Contact Technique Support if the
screen remains black after
implementing the above
measures.
Summary of Contents for PPC-1006
