BPI Software Instructions
PPC-1006
· 21 ·
II.
Device Management
USB storage device:
It mainly provides authority to access USB storage device, which is effective to
storage device of both U disk and USB port. This function setup is ineffective to USB
mouse and USB keyboard. When the button shows “Enabled”, it means the system
allows USB storage device to be connected and used; when the button shows
“Disabled”, it means the system does not allow connection to the USB storage device.
After the setup is finished, it becomes effective when USB storage device is
connected. After USB storage device is set to “Disabled”, when USB storage device is
connected, the system will not prompt to install USB device driver and will not show
the USB storage device disk.
Network adapter device:
It mainly provides disable/enable function for network adapter. When the button
shows “Enabled”, it means the network adapter is enabled, and network resource can
be normally accessed; when the button shows “Disabled”, it means the network
adapter is disabled, and network resource cannot be normally accessed, and local
connection setup is invalid.
Driver Disk C write protection:
It mainly provides Disk C write protection function. When the button shows
“Enabled”, it means in the current status the system has write protection function for
Summary of Contents for PPC-1006
