Application Scheme
MEC-5031-M SERIES
· 9 ·
2.3 Opening the Box and Initial Examination
2.3.1 Opening the Box
Please pay attention to the following issues when openin
●
Do not discard the original packing mater
Plea
material for re-transportation.
●
Please keep the documentation at a safe place. The d
ntation, which is a part
of the device, is required for initial device debugging.
●
When doing the initial examination, please check whether there are distinct
vice caused during the transport.
●
P
eck whether
ery contains
intact de
of the
independently ordered accessories. Please contact the customer service when any
unconformity or transportation damages occur.
2.3.2
ings
n
Attention
g the box:
se keep the original packing
ocume
ial.
damages to the de
lease ch
the deliv
the
vice and all
Mark
for PC Identificatio
Whe
duct needs
or after
been stolen
s can be
used to identify the PC. Please do not rip them
n the pro
to be repaired
it has
, these code
off.
Seria
located o
ody (as s
below)
l number:
n the chassis b
hown
Summary of Contents for MEC-5031-M Series
