EVOC IPC-820, User Manual

Page: 42 / 69

Product Introduction
- 4 - IPC-820
3). Power supply indication function;
4). Giving alarm for upper limit temperature of CPU or system;
5). Temperature measuring range: CPU -10 ℃～ 110 ℃ ; SYSTEM -40 ℃～ 80 ℃ ;
6). Temperature sampling duration: 3 seconds;
7). Saving set data for power failure;
8). Auto reminding for temperature over limit or sensor error (open or short)
1.3.2 Button Design
[SET] enter setup mode/switch setup object
[UP] Increase set value, 5°C for each click
[DOWN] Decrease set value, 5°C for each click
1.3.3 Operating Method
Click [SET] to enter setup status. Default CPU temperature is 75
℃
. After entering
into temperature setup interface, the value will flash at 1Hz. You can click [UP] to
increase the value by 5 ℃ each click or [DOWN] to decrease the value by 5 ℃ .
Click [SET] again to switch to System Limit Temperature setup, the System
Temperature value will flash.
Default setting temperature is 55 ℃ . After entering into temperature setup, the
temperature value will flash at 1Hz. You can click [UP] to increase the value by 5 ℃
each click or [DOWN] to decrease the value by 5 ℃ .
Decimal point and the number after the point will not show up while setting up.
[SET] Exit setup status, display the current CPU and SYSTEM temperature values; it
will show "--" when temperature is over limit or sensor error (open, short) occurs.
1.3.4 Giving Alarm When Temperature is Over Limit
When the actual temperature is over limit, buzzer will give alarm for three times and