Assembly and Maintenance
- 24 -
IPC-820
6.4 Installation and Removal of Power Supply
Item
Description
Item
Description
Item
Description
1
BS screw
MHW#6-32×1/4
2
Power
supply
3
M3 truss
head screw
Installing the Power
:
Place the power supply in the right position of the chassis, use four BS screws to
fasten the end of the power supply, finally use two M3 screws to fasten the power
supply mounting bracket onto the chassis.
Removing the Power:
Open the chassis cover, loosen the two M3 screws fixing the power supply mounting
bracket, loosen the four BS screws which fasten the end of the power supply, then you
can take out the power supply from the chassis.
Summary of Contents for IPC-820
Page 1: ...特种计算机 Industrial Computer 产品说明书 User Manual IPC 820 4U 上架机箱 4U Rack mount Chassis Version C01 ...
Page 13: ...产品安装说明 IPC 820 7 3 3 产品安装尺寸图 处安装孔 安装方法 用 M5 或 M6 的面板螺钉配合 M5 或 M6 的浮动螺母安装在标准 19 寸机 柜上 ...
Page 30: ...驱动程序安装说明 24 IPC 820 7 驱动程序安装说明 本产品的驱动程序安装及主板详细信息请参考整机配套光盘 在此不做介 绍 ...
Page 33: ......
