Chapter 2 Installation
- 12 -
IPC-6805E
1
，
Lay the power into the chassis, insert four screws (1, 2, 3 and 4 BS screws) into
the corresponding holes between the power and the rear baffle and then tighten
the screws.
2
，
Align the holes on the power bracket with that on the side wall of the chassis,
insert and tighten the two screws (5 and 6 truss head screws).
B: Exclusive Mini-type Redundant Power (Size: 185*150*86)
1
，
Fix the rear bracket and the side bracket enclosed with the redundant power with
the redundant power by enclosed screws and fasten them;
2
，
Lay the redundant power into the chassis (please remove the PS2 power bracket
before installing the redundant power);
3
，
Fix the power with the rear baffle (5, 6, 7 and 8 BS screws);
4
，
Align the rear bracket of the power with the rivets on the side wall of the chassis
and then tighten the screws (1 and 2 truss head screws).
Summary of Contents for IPC-6805E
